SAMSON Revises Its View on PFAS Restriction Proposal

|   À propos de SAMSON

SAMSON has once again taken part in the European procedure on the proposed restriction of per- and polyfluoroalkyl substances (PFAS). After participating in the first public consultation in 2023, SAMSON has now submitted its comments on the draft of the socio-economic analysis published in 2026.

SAMSON supports the European Union's objective to protect human health and the environment more effectively against the risks posed by PFAS. At the same time, SAMSON is campaigning for a differentiated and risk-based control of PFAS based on sound science. From SAMSON's point of view, the use of certain PFAS groups that are shown to present an unacceptable risk to human health or the environment should be restricted. SAMSON calls for fluoropolymers to be exempt from the proposed restriction.

 

Fluoropolymers are indispensable in numerous cases

As a world-leading supplier of products, systems and digital solutions to control all kinds of media, SAMSON would be significantly affected by an extensive ban of all PFAS.

SAMSON is not involved in the actual manufacture of PFAS. However, we purchase materials and parts that contain PFAS that are included in some of our products. This applies in particular to seals, diaphragms, linings and many other essential parts made of fluoropolymers.

SAMSON products are often used in particularly challenging conditions. Valves, actuators, sensors and other products must withstand very high or low temperatures, high pressures, corrosive chemicals and high mechanical stress over their service life. Our products must also be designed to keep process media from entering the atmosphere and meet strict safety, emissions and quality restrictions.

Fluoropolymers offer a unique combination of favorable properties: thermal and chemical stability, durability and reliable sealing performance. However, no alternatives currently exist that share such properties in a comparable manner.

A hasty ban of such materials would impair the performance and service life of our products. It could also have a negative impact on the safety of industrial plants and the reliable handling of hazardous, corrosive, hot or cryogenic media.

 

Risk-based regulation instead of blanket ban

SAMSON is in favor of a risk-based regulatory framework based on sound science. Avoidable PFAS emissions and the use of PFAS groups that are shown to present an unacceptable risk to human health or the environment should be banned. A blanket ban of all PFAS groups does not take into account the very different properties, uses and risk profiles of individual PFAS.

From SAMSON's point of view, the currently proposed restriction approach should be reversed: Instead of imposing a comprehensive ban and subsequently allowing numerous exceptions, the use of targeted PFAS groups that are shown to present an unacceptable risk should be restricted.

SAMSON calls for fluoropolymers to be generally exempt from the proposed restriction. Due to their favorable properties, they cannot simply be replaced in numerous safety-relevant industrial applications with currently available alternatives.

Long transition periods must be granted in cases where a substitution is technically possible and appropriate. The development, testing, qualification and approval of alternative materials and products takes time.

The supply of spare parts must also be taken into account. Many of SAMSON's products are used in industrial plants over many decades. As a result, a comprehensive ban would not only affect the manufacture of new products, but also the servicing, repair and long-term operational safety of existing plants.

It is not only a matter of finding alternative materials. They must also offer the same level of thermal and chemical stability, safety, service life and long-term availability.

 

More transparency and reviewing alternatives

We are working together with our suppliers to systematically identify and document materials and parts that contain PFAS within our product portfolio. This information is being gradually added to the material master data.

In this way, we can achieve the necessary transparency to assess regulatory requirements, respond to customer inquiries and examine potential substitutes.

At the same time, our experts are working closely with suppliers and engineering partners to examine possible alternatives. To date, however, no materials have been identified for a wide range of uses, which could help us replace fluoropolymers without impacts to safety, function or service life.

At SAMSON, we have many years of experience in the safe handling of a wide range of materials and chemicals. Compliance with quality, safety and environmental standards at SAMSON ensures the safe processing and handling of products that contain PFAS.

We are in regular contact with our business partners, suppliers and professional associations to closely monitor how the European restriction process develops.

 

Background information on the EU PFAS restriction proposal

PFAS are an extensive group of several thousand synthetically produced chemicals. Due to their high thermal and chemical stability, oil and water repellence as well excellent ageing properties, they are used in a wide range of industrial applications and consumer products. Many PFAS are extremely resistant to degradation. They do not break down easily. This leads to their accumulation in the environment.

In early 2023, Germany, Denmark, the Netherlands, Norway and Sweden submitted a joint proposal to the European Chemicals Agency (ECHA), which outlined an extensive ban on PFAS as part of the REACH Regulation.

The proposal outlines the restriction of the manufacture, use and placing on the EU market of PFAS substances. Exemptions and longer transition periods for certain applications, however, are being examined. A final decision about the specific extent of the restriction has not yet been taken.

ECHA ran its first six-month public consultation on the original proposed restriction from March to September 2023. At that time, SAMSON submitted its opinion on this proposal. This included technical requirements of the process industry and the special importance of fluoropolymers for safety-relevant applications.

The two scientific commissions at ECHA then assessed all the submitted opinions. The Committee for Risk Assessment (RAC) examined the risks posed to human health and the environment and adopted its final opinion on 2 March 2026.

The Committee for Socio-Economic Analysis (SEAC) focused on how proportionate the planned measures would be and looked into the availability of alternatives and the socio-economic impacts. It adopted its draft opinion on 10 March 2026.

RAC supports a EU-wide restriction on PFAS. In its previous draft, SEAC was also in favor of a restriction, yet took into account the socio-economic impact and availability of alternatives. It proposed specific exclusions for certain applications. Its final opinion is expected by the end of 2026.

 

Second consultation in 2026

A further consultation on the SEAC draft opinion ran from 26 March to 25 May 2026. This time, it did not cover the originally proposed ban, but a socio-economic analysis.

It focused on the availability and suitability of possible alternatives, required transition periods, cost implications and potential impacts on supply chains and competitiveness as well as the necessity of certain exclusions.

SAMSON also used this consultation to present its revised view and added further information on how the company would be affected.

3511 comments from more than 3200 organizations and 250 individuals were submitted during the 60-day consultation. SEAC is currently reviewing the submitted contributions and will assess whether they will make it necessary to change its original draft.

 

What will happen next?

SEAC is expected to adopt its final opinion by the end of 2026. This adoption will conclude the scientific evaluation of the proposed restriction by the ECHA's Committees.

The original proposed restriction and the opinions of RAC and SEAC will then be formally submitted to the European Commission. Based on this, the Commission can draft an amendment to Annex XVII of the REACH Regulation.

The European Commission has made clear that it is aiming to minimize PFAS emissions as far as possible. At the same time, continued use in critical industrial applications may be permitted where adequate alternatives are not yet available.

The proposed regulation will then be discussed among the EU Member State representatives in the REACH committee. The European Parliament and Council will also be involved in the further decision process. Only at the end of this process, it will become clear which PFAS applications will actually be restricted, which exemptions and transition periods apply and how individual substance groups and applications are to be treated.